Replacement parts

Sort | Name:    Order No.:    Default View | List  Grid

pH Glass Electrode
Replacement electrode for the Data Harvest pH sensor.
Order No. 2251
More Info
Conductivity Electrode
This Conductivity electrode is used with a Conductivity adapter to measure the conductivity of a solution
Order No. 3136
More Info
Oxygen Electrode
This electrode is used in combination with the Oxygen Adaptor to form the dual range Oxygen sensor, capable of measuring oxygen levels in air, or dissolved oxygen levels in water.  
Order No. 3131
More Info
Switch Kit for Timing Ramp
This Switch kit has been designed for use with the Timing Ramp (3842) 
Order No. 3841
More Info
EasySense VISION Replacement Stylus 10 Pack
A pack of 10 spare stylus for VISION Data Logger range.
Order No. 2038PK
More Info
Long Sensor Lead
1.5 m male/male sensor lead. Use to connect a SmartQ sensor to an EasySense Data Logger (except Flash Logger & Vu).
Order No. 3005
More Info
Sensor Extension Lead
1.5 m male/female sensor extension lead. Use with the 3004, 3005, and Flash sensor leads to extend the length of lead between the data logger and a SmartQ sensor.  
Order No. 3017
More Info
Short Sensor Lead
 150 mm male/male sensor lead. Use to connect a SmartQ sensor to an EasySense Data Logger (except Flash & Vu loggers or sensors).  ...
Order No. 3004
More Info
USB Lead
USB lead, 1.8 m in length (standard A to standard B).
Order No. 3008
More Info
Cuvettes (Pack of 100)
10 x 10 mm optically clear 4.5 ml plastic cuvettes (a box of 100 with 10 lids) 
Order No. 3321
More Info
Red Gratnell Smart Case
Red Gratnells Smart Case with removable foam insert.
Order No. 2490
More Info
Replacement EasySense Battery Pack
This is a replacement battery pack.
Order No. 5007
More Info
EasySense VISION Replacement Battery Pack
Battery pack for EasySense VISION & VISION Wi-Fi
Order No. 2036
More Info
Power Supply 5V UK
5V DC UK mains adaptor, able to supply 500 to 1000 mA with a positive centre and negative outer pin. 
Order No. 5009
More Info
Colour Filter Slides
Set of 4 colour filters for Colorimeter (3275)
Order No. 3275SPP
More Info
3.5mm Jack Lead 10m
10 m lead terminated to a 3.5 mm jack plug at each end. Can be used to connect devices to the Count/Tachometer adaptor (3296)
Order No. 3300
More Info
Drop/Bubble Counter Replacement Parts Pack
2 x 3- way Stopcocks and 5 x plastic tips - replacement parts for the Drop & Bubble Counter (3266).
Order No. 3271
More Info
Dynamics Bracket Pack
LB1 x 5 Bracket - large angled, black, nylon  SB1 x 5 Bracket - small angled, black, nylon 
Order No. 3824SPP
More Info
Dynamics Card, Clip and Retainer Pack
ER1 x 5 End reflector, black plastic (Motion detector) IC1 x 5 Interrupt card for cart, black plastic  LH1 x 2 Sensor holder -U clip  MR2 x 10 Mass retainer 
Order No. 3825SPP
More Info
Dynamics Magnet Pack
MG1 x 5 Magnet - ring, 36 mm dia x 8 mm thick  MGH1 x 5 Magnet holder 
Order No. 3826SPP
More Info
Dynamics Screws and Bolts Pack
SS M6 x 20 Screw - Hex set, M6 x 20 mm  WN1 x 10 Wing bolt, M6 WN2 x 20 Wing nut, M6, nylon TS1 x 10 Screw - thumbscrew, knurled, black, M4 x 15  BLT1 x 1 Bolt - Hex, M6 x 65 mm  BLT2 x...
Order No. 3823SPP
More Info
Dynamics Spring Pack
SPR1 x 5 Spring - compression 0.032"/0.8mm SF1 x 5 Spring end, flanged bush  BF2 x 5 Buffer, rubber, M4 x 10mm diameter
Order No. 3827SPP
More Info
ECG Patches
Pack of 100 disposable patches for use with the ECG Sensor (3279).
Order No. 3286
More Info
Force Sensor Spares Pack
Replacement parts for the Force Sensor (3143)
Order No. 3143SPP
More Info
Finger/EarLobe clip (Pleth)
 Replacement finger/ear lobe clip (pleth) for the SmartQ Heart Rate Sensor (3147) and the Vu Heart rate sensor (2327)
Order No. 3147SPP
More Info
Infrared Detachable filter
Replacement filter for the Infrared Sensor (3278)
Order No. 3278SPP
More Info
K-Type Thermocouple
This K-Type thermocouple is a replacement part for the Temperature High (K-Type) sensor. The thermocouple junction is housed at the end of a 200 x 3 mm AISI 310 stainless steel sheath. It has a one m...
Order No. 3107
More Info
Optical Slide Set
Set of 2 optical slides for use with the SmartQ Laser Module Sensor (3285)
Order No. 3285SPP
More Info
Oxygen Electrode Maintenance Kit
Maintenance Kit for the Oxygen Electrode (3131) - consists of 3 spare membranes and 50 ml of electrolyte.
Order No. 6172
More Info
Polar Heart Rate Belt - Large
This is the elastic part of the transmitter belt for the Polar Heart rate sensor (3148). It does not include the T31 transmitter (3272). To fit chest size (approximately) 74 to 155 cm (29 to 61 inch...
Order No. 3274
More Info
Polar Heart Rate Belt - Small
This is the elastic part of the transmitter belt for the Polar Heart rate sensor (3148). It does not include the T31 transmitter (product no 3272). To fit chest size (approximately) 63 to 115 cm (25...
Order No. 3273
More Info
Polar Non Coded Transmitter (T31)
This is the T31 transmitter part of the transmitter belt for the Polar Heart rate sensor (3148). It does not include the elastic belt attachments – small elastic belt (3273), large elastic belt...
Order No. 3272
More Info
Spirometer Filters
Pack of 10 flow head filters. Replacements parts for the Spirometer sensor (3267).
Order No. 3269
More Info
Spirometer Nose Clips
Pack of 5 nose clips. Replacements parts for the Spirometer sensor (3267)
Order No. 3264
More Info
Support Rod (Metal) - pack of 5
Pack of 5 support metal rods (80mm long x 10mm diameter with an m6 thread). For use with: Light Gate (3250), Motion (3270) & Drop/Bubble (3266)...
Order No. 3250SPP
More Info
Sort | Name:    Order No.:    Default View | List  Grid